The SBD-1 adapter converts the signal from each S.BUS output separately to PWM, so you can connect analog servos!
You can assign the same or different S.BUS channel numbers to the outputs.
The S.BUS channel number can be selected via:
- S-BUS interface on FASSTest or T-FHSS transmitters with the function e.g. T6K, T10J, T14SG, T12K plus all mid-range and high-end radios.
- a PC with SBD-Link software (CIU-2 or -3 adapter required)
- the handy S-BUS programmer SBC-1
Suitable for use on 2S LiPo!
Features:
Temperature range: -15 ... + 55 ° C
Operating voltage: 4 to 5 NiMh or 2S LiPo cells (4.8 to 8.4 V)
Weight approx: 14g
Dimensions: 41.8 x 12.3 x 8.4 mm
You can assign the same or different S.BUS channel numbers to the outputs.
The S.BUS channel number can be selected via:
- S-BUS interface on FASSTest or T-FHSS transmitters with the function e.g. T6K, T10J, T14SG, T12K plus all mid-range and high-end radios.
- a PC with SBD-Link software (CIU-2 or -3 adapter required)
- the handy S-BUS programmer SBC-1
Suitable for use on 2S LiPo!
Features:
Temperature range: -15 ... + 55 ° C
Operating voltage: 4 to 5 NiMh or 2S LiPo cells (4.8 to 8.4 V)
Weight approx: 14g
Dimensions: 41.8 x 12.3 x 8.4 mm
