Rupture de stock
Electronic car switch.
This switch connects a battery to a Futaba receiver. The ON/OFF contact is made with a FET.
Compared with a mechanical switch, this one allows more current to be sent with less loss.
The switch has an anti-dust and anti-drip structure.
This switch works with a Nimh/Lipo/Life battery.
The 3 programming modes save your batteries from excessive discharge.
Mode 1: Normal Nimh mode, no cut-off!
Mode 2: Lipo mode, cut-off at 6.2V
Mode 3: Life mode, cut-off at 5.5V
Specifications:
- Dimensions: 23.6x19.6x7.6mm
- Power supply: 4.8V to 7.6V (operating range 3.5V-8.7V)
- Current capacity: 10A (maximum 15A/30s)
This switch connects a battery to a Futaba receiver. The ON/OFF contact is made with a FET.
Compared with a mechanical switch, this one allows more current to be sent with less loss.
The switch has an anti-dust and anti-drip structure.
This switch works with a Nimh/Lipo/Life battery.
The 3 programming modes save your batteries from excessive discharge.
Mode 1: Normal Nimh mode, no cut-off!
Mode 2: Lipo mode, cut-off at 6.2V
Mode 3: Life mode, cut-off at 5.5V
Specifications:
- Dimensions: 23.6x19.6x7.6mm
- Power supply: 4.8V to 7.6V (operating range 3.5V-8.7V)
- Current capacity: 10A (maximum 15A/30s)
