DPS 25 is supplied unwired.
The DPS-25 is used to switch on a receiver system safely and without wear, supplying it with high currents for optimum servo performance while increasing safety by using two separate receiver batteries for battery redundancy. Of course, the DPS-25 can also be used with a single battery as a pure receiver switch.
To be able to use the optimum performance of fast, powerful servos, you need a power supply that delivers the necessary high currents, without losses, and directly to the receiver's servo sockets.
Features:
- Rechargeable battery with electronic safety buttons
- High-power FET for 25 A continuous current (short 40 A) with the lowest internal resistance of the switch.
- LED display for each battery
- Safe 0.5-second interrupt skip for bounces
- High-current supply to 3 receivers Futaba with high-quality gold contacts
- Vibration-resistant thanks to SMD technology
- No mechanical wear
- Ideal for all applications with powerful digital servos.
- Supply servos from 1 or 2 batteries with high current.
- Max. voltage drop 0.2V at 20A - Automatic switchover in the event of battery failure
- Only passive, intrinsically safe electronics, no software.
Technical data:
- Input voltage 4.5 - 8.4V
- Total power: up to 300 W
- Weight: 25 g
- Dimensions: 46x17x11 mm
The DPS-25 is used to switch on a receiver system safely and without wear, supplying it with high currents for optimum servo performance while increasing safety by using two separate receiver batteries for battery redundancy. Of course, the DPS-25 can also be used with a single battery as a pure receiver switch.
To be able to use the optimum performance of fast, powerful servos, you need a power supply that delivers the necessary high currents, without losses, and directly to the receiver's servo sockets.
Features:
- Rechargeable battery with electronic safety buttons
- High-power FET for 25 A continuous current (short 40 A) with the lowest internal resistance of the switch.
- LED display for each battery
- Safe 0.5-second interrupt skip for bounces
- High-current supply to 3 receivers Futaba with high-quality gold contacts
- Vibration-resistant thanks to SMD technology
- No mechanical wear
- Ideal for all applications with powerful digital servos.
- Supply servos from 1 or 2 batteries with high current.
- Max. voltage drop 0.2V at 20A - Automatic switchover in the event of battery failure
- Only passive, intrinsically safe electronics, no software.
Technical data:
- Input voltage 4.5 - 8.4V
- Total power: up to 300 W
- Weight: 25 g
- Dimensions: 46x17x11 mm
